Printer-Support

An HP Scanner Error 22 message will display on the scanner control panel while users will try to perform scan process from the scanner. This error get displayed at the time of extra weight or pressure is applied to the scanner glasses and to take few examples, here you can say, it may happen while scanning an open book. The weight or pressure can then immediately stop the scanner functioning. Below all the discussed steps will help you in recovering from these issues at much faster rates.

 

hp-scanner-error

 

Steps to Solve HP Scanner Error 22 Display Problem

Step 1: Working with Scanner

Turn on the scanner on, if it’s the case when it is already turned on. You are required to wait for the scanner to get idle before you start continuing for the process.

Step 2: Turn on Scanner

With your scanner turned on, it is advisable to disconnect the power cord from the rear of the scanner.

Step 3: Power on Cord

  • Unplug the power cord from the wall outlet carefully.
  • Wait at approximately 60 seconds.

 

More Detail Contact Printer Tech Support or Call our Toll-Free Number 1-855-966-3855.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>